Understanding The Width Of 65-Inch TV: A Complete Guide

Introduction

When purchasing a new television, especially a 65-inch TV Width, one of the most crucial factors to consider is its width. While most buyers focus on the screen size, the width plays a vital role in determining whether the TV will fit on a stand or in a specific wall space.

What Does a 65-Inch TV Size Mean?

The 65-inch measurement refers to the diagonal length of the screen, not the width. This diagonal is measured from one corner of the screen to the opposite corner. However, the width (or horizontal length) of the TV is a different measurement and depends on the aspect ratio and bezel design.

Standard Width of a 65-Inch TV

Most 65-inch TVs have a standard 16:9 aspect ratio, which means the width is approximately 57 inches (144 cm). However, this may vary slightly depending on the brand and model.

General Width Ranges by TV Type:

• Standard 65-Inch TV: Around 56.7 to 58 inches (144-147 cm) in width.

• 65-Inch OLED TV: Typically slightly smaller bezels, around 57 inches (145 cm) in width.

• 65-Inch QLED TV: Similar to standard LED TVs, ranging from 56.5 to 58 inches (143-147 cm).

• 65-Inch Curved TV: Width may be slightly reduced due to the curve, but it remains within the 56 to 58-inch range.

Factors That Affect the Width of a 65-Inch TV

1. TV Bezel Thickness

Older models used to have thicker bezels, making the total width greater. However, modern TVs come with ultra-thin bezels, which reduce the overall size of the TV while maintaining the same screen size.

2. Curved vs. Flat Screens

A curved 65-inch TV may appear to have a slightly narrower width because of its design. However, the difference is minimal and does not significantly impact the space required for installation.

3. Stand vs. Wall Mount

If you plan to place the TV on a stand, you must also consider the width of the stand or base. Wall-mounted TVs require accurate width measurements to ensure they fit within the designated wall space.

Measuring a 65-Inch TV for Your Space

Before buying a 65-inch TV, take these steps to ensure it fits properly:

1. Measure the Available Space

• Use a tape measure to check the width of the wall or stand where the TV will be placed.

• Ensure that the space is at least 58 inches wide to accommodate most 65-inch TVs.

2. Consider Additional Space for Ventilation

• Leave at least 2-3 inches of space on each side for airflow.

• If placing on a stand, ensure that the stand is wider than the TV to prevent tipping.

3. Account for Soundbars and Accessories

• If you plan to use a soundbar, make sure there is enough space beneath or in front of the TV.

• Some stands may be narrower than the TV width, so check compatibility before purchasing.

Popular 65-Inch TV Models and Their Widths

1. Samsung 65-Inch QLED TV

• Width: 57.1 inches (145 cm)

• Bezel: Ultra-thin design

2. LG 65-Inch OLED TV

• Width: 56.9 inches (144.5 cm)

• Bezel: Minimal bezels, sleek design

3. Sony 65-Inch Bravia XR LED TV

• Width: 57.3 inches (145.5 cm)

• Bezel: Slightly thicker than OLED models

Mounting a 65-Inch TV: Wall vs. Stand Placement

Wall Mounting Considerations

• Use a VESA-compatible wall mount that supports the TV’s weight and width.

• Ensure the wall area is at least 60 inches wide to allow for safe mounting.

• Maintain eye-level positioning for the best viewing experience.

TV Stand Placement

• Choose a stand that is wider than 58 inches for stability.

• Make sure the stand height provides a comfortable viewing angle.

• Consider a swivel stand if you need to adjust angles frequently.

Conclusion

The width of a 65-inch TV is typically around 57 inches, but the exact measurement varies by brand, model, and design. Before purchasing, always measure your available space, account for ventilation, and consider additional accessories like soundbars or stands.

Check out new and latest article to see by clicking here.